Products
Temperature Sensors
All heating hoses are equipped with a Fe-CuNi thermocouple sensor. However, other sensor types are also available on demand.
Control Cables, Plug Connectors
For the operation of a current-consuming device with temperature sensor, control cables or single-wire conductors can be integrated into the heating hose and are led out at the end of the hose.
Usually, a 7-pole circular connector suitable for our temperature regulators is mounted at the power supply cable. On request other connector types are available.
| order no. | optional equipment |
| 89 20 03 | control cable per conductor and meter heating hose 0.75 Ø |
| 89 20 00 | control cable per conductor and meter heating hose 1.5 Ø |
| 89 20 04 | extended control cable per meter 3-conductor |
| 89 20 05 | extended control cable per meter 5-conductor |
| 89 20 06 | extended control cable per meter 7-conductor |
| 89 20 07 | 7-pole coupling "Binder S693", mounting for control cable included |
Power Supply Cable, Sensor Connecting Cable
In basic configurytion the cable length is 1.5 m, except for H 13 and H 13 A series, which have a mains supply line of 3 m. On request, other lengths are possible.
In addition, mains and sensor can be led out separately. In this case, each line needs its own plug.
| order no. | optional equipment |
| 89 20 08 | extended power supply per meter |
| 89 20 09 | mains / sensor separated with 7-pole diode plug |
Hard End Caps Made of Polyamide 6
Connecting cables can be led out either in direction to the front or in direction to the center of the hose. All electrical connections are easily accessible, the connecting cable is strain-relieved, due to a cable gland.
The hard cap is fixed with the base hose. As a result the cap cannot be torn out or twisted by thermal expansion or strong movements. The bending point is set far behind the armature, which relieves the critical connection between hose and armature.